[Fot] TR6 Race Headers

[van.mulders.marcel at telenet.be]

The exhausts of Tony Law (TLE) are often used. It is a 6 into 3 into 1 design and seems to work well. They are relatively easy to fit. But of course there are other exhaust systems that are performing well. 
Marcel. 


Van: "fot" <fot at autox.team.net> 
Aan: "Erik Jacobsen" <kekjacobsen at yahoo.com> 
Cc: "fot" <fot at autox.team.net> 
Verzonden: Dinsdag 6 oktober 2020 22:03:28 
Onderwerp: Re: [Fot] TR6 Race Headers 

I use Goodparts, Richard Good. 
The exhaust pipe design is important too. 

Sent from my iPhone 



On Oct 6, 2020, at 10:39 AM, Erik Jacobsen via Fot <fot at autox.team.net> wrote: 





BQ_BEGIN

All, 
Hope this is the approved way to ask a question of the group... 
Any preferences for a TR6 header? This is for a high compression, big cam race motor. Don't particularly care about finish, just looking for something that flows well. 

Thanks much! 

Jake 
_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot 
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/awashatko@wi.rr.com 



BQ_END


_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot 
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20201007/1ec49023/attachment-0003.htm>