[Fot] Line Boring

[Jim Gray]

There are a few different shops in Colorado that do line bores. The Block Shop is one and HiPro Engines is the other.
I built a GT6 motor about 5 years ago and British Sports Werks in Estes Park got the cam bearings drilled for me.
http://britishsportswerks.com/

Jim G

-----Original Message-----
From: Fot <fot-bounces at autox.team.net> On Behalf Of yellow04 via Fot
Sent: Tuesday, March 24, 2020 5:27 AM
To: fot at autox.team.net
Subject: [Fot] Line Boring

Very frustrating indeed!

I have used Richard Good for the service, he can bore out the 6 cylinder block for cam bearings in his shop.

On 2020-03-23 21:20, Scott Janzen via Fot wrote:
> It can be done in eastern Pa, last i checked.
> 
> Sent from my iPhone
> 
>> On Mar 23, 2020, at 6:38 PM, Greg Blake via Fot <fot at autox.team.net>
>> wrote:
> 
>> Especially if you want cam bearings in a TR6 block. Frustrating 
>> indeed.
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net