[Fot] Fwd: Bfe24 camshaht

[Tony and Annie Garmey]

Hi Marcel - I run this cam in a lot of engines I build .
0.018 and 0.020 normal. You can also try 16/18 .

Regards
Tony

Sent from my iPhone

On Mar 23, 2020, at 4:54 AM, van.mulders.marcel--- via Fot <fot at autox.team.net<mailto:fot at autox.team.net>> wrote:


This is tappet lift  vs. crankshaft degrees (degrees before maximum valve lift) of a BFE 24 camshaft mounted in an engine. I wonder how much tappet or valve clearance (1.55 rocker ratio) one would recommend? I asked some people and searched the web : 0.020 to 0.026"/0.50 to 0.65mm is recommended.
Marcel
________________________________
Van: "trbelgium1" <trbelgium1 at gmail.com<mailto:trbelgium1 at gmail.com>>
Aan: "van mulders marcel" <van.mulders.marcel at telenet.be<mailto:van.mulders.marcel at telenet.be>>
Verzonden: Maandag 23 maart 2020 12:21:00
Onderwerp: Bfe24 camshaht

Verzonden vanaf mijn Samsung Galaxy-smartphone.

<20200323_121841.jpg>
_______________________________________________
fot at autox.team.net<mailto:fot at autox.team.net>

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/horizonracing@msn.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200323/94703492/attachment-0003.htm>