[Fot] Has anybody put a TR4 tub on a TR6 chassis?

[Bob Kramer]

I am interested in the answer too. I know that the 4A frame would work
under a TR6.  The only major difference I see is the cruciform structure
over the driveshaft tunnel on the 4A was replaced by plates on the 6
cylinder cars.  I suspect that Triumph changes the mount point stampings on
the floor pans to cover both ladder and IRS frames with the inception of
the IRS cars.  I could go compare floor pans on a parts car TR4 to the TR4A
I have but somebody knows for sure.

Bob Kramer


On Wed, Jun 3, 2020 at 6:56 AM yellow04 <yellow04 at tr4racer.com> wrote:

> I figured this was the place to ask this question.
>
> I am selling an early TR4 project/parts car on Craigslist and just got a
> question that I can't answer. Will a TR4 tub that goes on the ladder
> frame mount to an IRS wishbone frame?
>
> Thanks.
>
> Henry
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/rkramer56@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200603/981db15c/attachment-0003.htm>