[Fot] GT6 rear shocks

[JOE CURRY]

Without the rotating mass of the rotoflex joints, you should be able to use the same shocks as the non-rotoflex cars use, and the same attaching points.


> On December 4, 2020 at 7:41 AM Jason Sukey via Fot <fot at autox.team.net> wrote:
> 
>     Greetings FOT,
>            On my GT6 MK3 racecar, (rotoflex halfshafts have been replaced with Datsun u-jointed shafts), I'd like to relocate the rear upper shock mount from the standard wheel arch sheet metal mount inboard to the frame, using the mounting points already there for the spitfire/gt6 swing axle shock mounts.  Since the big rotoflex joints aren't there, it looks like I'll have plenty of clearance.  
> 
>     This will shorten the distance between mounting points significantly, I expect the Rotoflex length shocks will bottom out.  Does anyone know if the "off the shelf" swing axle length shocks (Koni or Spax) will work for this?
> 
>     Jason
>     _______________________________________________
>     fot at autox.team.net
> 
>     http://www.fot-racing.com
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/spitlist@cox.net
> 
> 
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20201204/ad9e4ac0/attachment-0003.htm>