[Fot] TR-4 liner seals

[tr4racing at googlemail.com]

Hi,

 

the simplest method is:

*	1 layer of silicone on the blocks surface
*	Putting the figure 8 gasket on
*	1 layer of silicone on the liners seat
*	Slipping the liner in the block 
*	Pushing them down with the head
*	Let it rest a few hours

No water will ever hit the figure 8 gasket again.

Use plenty of silicone at this point. It will be squeezed out.

 

Cheers

Chris

 

 

Von: Fot <fot-bounces at autox.team.net> Im Auftrag von Henry A. Morrison via
Fot
Gesendet: Donnerstag, 2. April 2020 04:52
An: fot <fot at autox.team.net>
Betreff: [Fot] TR-4 liner seals

 

Hope everyone is well during this extraordinary time. 

 

That said, my machinist is telling me he is concerned with the pits in my
block down where the figure 8 seals live.  He says we might have machine
down there and deck the block.  

 

Isn't there a glue, JB weld or vaccine that will take care of this?  

 

What say you?  

 

PS: my competition prep manuals are all in a Pod as I am moving to Salt Lake
soon.

 

Cheers, Henry Morrison, Cedar Crest, NM

 

Sent from Outlook <http://aka.ms/weboutlook> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200402/1af18d6a/attachment-0003.htm>