[Fot] DCOE setup on stock tr6

[chris panayotti]

Yes I believe the vents are clear. It's a pretty large hole that goes into
the air filter housing if I'm not mistaken. But I will double check that.

Chris

On Fri, Nov 15, 2019, 8:51 PM Chuck Gee <chasgee22 at gmail.com> wrote:

> Are the bowl vents clear?
>
> Sent from my iPhone
>
> > On Nov 15, 2019, at 5:44 PM, Scott Janzen via Fot <fot at autox.team.net>
> wrote:
> >
> > 
> > More information is needed.
> > I assume these are 40 DCOEs, not 45s?
> > What size chokes are you running?
> > Main jets, idle jets?
> >
> > Sent from my iPhone
> >
> >> On Nov 15, 2019, at 7:52 PM, chris panayotti via Fot <
> fot at autox.team.net> wrote:
> >>
> >> 
> >> Hi all,
> >>
> >> I ran across an archive on your site from a Robert Lang, looks like
> from December last year. So Taking a total shot in the dark emailing this.
> Anyway in the thread he talks about running triple DCOEs on a Canon
> manafold on a TR6 with stock cam and stock compression. I am trying to do
> the exact same. He mentioned toward the end that he would be willing to
> share knowledge on the jets and knowledge.
> >>
> >> So here it goes, the main symptom I am running into currently is
> accleration off idle.  It starts up and idles pretty good with mixture
> screws all out about 1.25 turns. But bumping the throttle at that point
> either load or no load bogs bigtime, bassically kills the engine if I hold
> it, even if I go very slowly. I did manage to get it to a point where it
> revs so so if I keep bumping it fast with no load, but with any load at all
> it bogs and dies.  I've come to the conclusion my progression circuit is to
> blame and that operates off the idle jet, of which all are currently 50F11.
> >>
> >> I've gone over all the valve timing with a fine toothed comb and
> verified a stock cam by checking the lift. All valve gaps are perfect At
> .010".  I removed the vacuum retard from the distributor and am running it
> at 12deg BTDC right now, and the mechanical advance does work and brings it
> up to 24ish deg.  It is a stock points distributor by the way.  I've read a
> few people mention that I need to upgrade that but others have successfully
> used it also. I've checked compression all are close and above 125psi.
> >>
> >> Any help or insight would be GREATLY appreciated. I've been trying to
> get this to run right for weeks. I keep crossing things off the list but
> still haven't gotten it right. I'm still concerned about the distributor
> but it seems well enough that it should run properly. I'm fairly confident
> it's a carb problem.
> >>
> >> If you need any more info about my setup please ask
> >>
> >> Thank you
> >> Chris Panayotti
> >> _______________________________________________
> >> fot at autox.team.net
> >>
> >> http://www.fot-racing.com
> >>
> >> Donate: http://www.team.net/donate.html
> >> Archive: http://autox.team.net/archive
> http://www.team.net/pipermail/fot
> >> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/sjanzen@me.com
> >>
> >>
> >
> > _______________________________________________
> > fot at autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/chasgee22@gmail.com
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20191115/1d801b11/attachment-0003.htm>