[Fot] laycock clutch question

[Phil Gott]

Brian;
All perfectly normal.
Just be sure that the throwout bearing is compatible with the “fingers.” If the fingers are straight the throwout bearing face should be rounded. If the fingers have a crook in them (bent) then the throwout bearing face should be flat.
Enjoy your new clutch!
Phil Gott

Sent from my iPhone

> On May 23, 2019, at 10:23 PM, Brian Schirano via Fot <fot at autox.team.net> wrote:
> 
> Hey Friends
> 
> just installed a new to me (rebuilt) laycock PP and a new clutch disc. As I tightened the PP the fingers ended up pretty much flat across, no longer peaked. So when the hydraulics is engaged the throw out will press the clutch fingers deflecting inward (invert from when on the bench). Makes me uncomfortable / doesn't seem right. 
> 
> Normal / Correct? 
> 
> am hoping to put the trans back in tomorrow afternoon, comments please
> 
> Thanks
> Brian
> 
> 26A GT6+
> Brian Schirano
> 585-305-0349 Cell 
> BSchirano at yahoo.com
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190524/c72030cc/attachment-0001.htm>