[Fot] Spun Aluminum Head Lamp Replacements.

[Joe Alexander]

Thanks Bill,

I think it’s the lighting. They are just untreated aluminum.

I have a very good method for installing the decal. Ours have been on the car for over ten years and still look like new.

Tech inspectors have been known to ask why we didn’t tape our headlamps. 

See you in May.

Joe Alexander
4505 Donald Dr
Cedar Falls, IA 50613
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711


> On Mar 10, 2019, at 1:19 PM, Bill Dentinger <billdentin at aol.com> wrote:
> 
> Joe...
> 
> I used both of these tiems from your original run many years ago.  They're great!
> 
> I remember those to look more 'nickel plated'.  These look gold, and a bit 'Corvetty'.  Is that on purpose?
> 
> I think using the 'Lucas Decal' with them is the way to go, and you're offering to install those decals is AWESOME, as doing so is tricky.
> 
> Bill Dentinger
> 
> 
> 
> -----Original Message-----
> From: Joe Alexander via Fot <fot at autox.team.net>
> To: fot <fot at autox.team.net>
> Sent: Sun, Mar 10, 2019 10:50 am
> Subject: [Fot] Spun Aluminum Head Lamp Replacements.
> 
> Just did a new production run of these.  Discounted to FOT if you have an interest/need. Otherwise, they are available thru Pegasus. 
> 
> The P-700 Lucas Decal is also available and I will install it for you. 
> 
> Thanks.
> 
> 
> Joe Alexander
> 4505 Donald Dr
> Cedar Falls, IA 50613
> The-vintage-racer.com
> Gasketinnovations.com
> Cell:  319.464.4711
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/billdentin@aol.com
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190310/9fd53825/attachment-0001.htm>