[Fot] Weber manifolds for GT6

[TeriAnn J. Wakeman]

On 3/7/19 6:22 PM, Richard Gehweiler via Fot wrote:
> Looking for a set of manifolds to put Webers on a GT6 or the whole 
> setup for that matter. Would prefer 45 DCOE. If anyone has some they 
> are looking to unload, please contact me.
> Thanks
> Mini at wi.rr.com

I don't pretend to be an expert but wouldn't three 45DCOEs be a tad 
large for a GT6 engine? Off hand without knowing your engine it seems 
like three 40DCOEs would do the trick and be more RPM flexible.

 From my Weber page:

The largest choke that will work optimally in a 40DCOE is a 34 choke. 
The smallest choke that will work optimally in a 45DCOE is a 34 choke. 
While larger chokes are available for 40DCOEs and smaller ones are 
available for 45DCOEs they will not work as well for this application.  
The 42DCOE  only had 28, 30, 32 and 34 chokes available.


TeriAnn

-- 

Book - The Essential Guide to Overland Travel in the United States and 
Canada <http://overlandtravel.us>
2 years to write and 38 years of travel and camping to learn what to write

*Because the world beckons and life waits for no one*

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190308/e476cb2f/attachment-0001.htm>