[Fot] Pilot Bushings

[chasgee22 at gmail.com]

I get them from McMaster Carr.  Measure, OD, ID, and length and order.  Oilite bushings.

Chuck

> On Mar 7, 2019, at 11:27 AM, DPPI - Mark Craig via Fot <fot at autox.team.net> wrote:
> 
> Would a normal automotive engine machine shop have one??
>  
> <image001.png>
>  
> MARK CRAIG
> Diesel Performance Parts, Inc.
> 411 Allied Drive, Nashville, TN 37211
> www.dieselperformanceparts.com
> <image002.jpg> <image003.jpg> <image004.jpg> <image005.jpg>
>  
>  
> Phone: 615-834-0066
> Fax: 615-834-9923
> Email: mark at dieselperformanceparts.com
>  
>  
>  
> From: Joe Alexander [mailto:joealexandervintage at gmail.com] 
> Sent: Thursday, March 07, 2019 1:18 PM
> To: DPPI - Mark Craig <info at dieselperformanceparts.com>
> Subject: Re: [Fot] Pilot Bushings
>  
> <image006.jpg>
> Knurling Tool is common operation.  Our valve cover fasteners.
> Joe Alexander
> 4505 Donald Dr
> Cedar Falls, IA 50613
> The-vintage-racer.com
> Gasketinnovations.com
> Cell:  319.464.4711
>  
> 
> On Mar 7, 2019, at 1:13 PM, DPPI - Mark Craig <info at dieselperformanceparts.com> wrote:
> 
> I thought of that too but how do you do that?? I have seen it on pistons and stuff but never seen it actually done on/to a part??
>  
> <image007.png>
>  
> MARK CRAIG
> Diesel Performance Parts, Inc.
> 411 Allied Drive, Nashville, TN 37211
> www.dieselperformanceparts.com
> <image003.jpg> <image004.jpg> <image005.jpg> <image006.jpg>
>  
>  
> Phone: 615-834-0066
> Fax: 615-834-9923
> Email: mark at dieselperformanceparts.com
>  
>  
>  
> From: Joe Alexander [mailto:joealexandervintage at gmail.com] 
> Sent: Thursday, March 07, 2019 12:22 PM
> To: DPPI - Mark Craig <info at dieselperformanceparts.com>
> Subject: Re: [Fot] Pilot Bushings
>  
> How about knurling them to increase the diameter? Just a thought.
> 
> Joe Alexander
> 4505 Donald Dr
> Cedar Falls, IA 50613
> The-vintage-racer.com
> Gasketinnovations.com
> Cell:  319.464.4711
>  
> 
> On Mar 7, 2019, at 10:11 AM, DPPI - Mark Craig via Fot <fot at autox.team.net> wrote:
> 
> Hey Listers,
>  
> Where do you’ll source your pilot bushings for the input of the tranny to the crankshaft?? I have been getting Dorman brass/bronze self-lubricating ones, but they are a little small on the OD and you can to push them into the crankshaft by hand. Seems they might be little loose per my tranny guy so I am looking for an alternative part!! What do you’ll use and where do you get them??
>  
> <image001.png>
>  
> MARK CRAIG
> Diesel Performance Parts, Inc.
> 411 Allied Drive, Nashville, TN 37211
> www.dieselperformanceparts.com
> <image002.jpg><image003.jpg> <image004.jpg> <image005.jpg>
>  
>  
> Phone: 615-834-0066
> Fax: 615-834-9923
> Email: mark at dieselperformanceparts.com
>  
>  
>  
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/joealexandervintage@gmail.com
> 
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/chasgee22@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190307/73ff6fd2/attachment-0001.htm>