[Fot] squaring pads

[ralph hansen]

 not to rain on the parade but, are you turning the rotors each time to make sure they are square also? if not, you now have unmatched surfaces - in the old days with good metal rotors I could see a slight advantage, these days with the good pads we get, and soft rotors they wear together, you might actually get a very slight increase in surface contact due to the angles and dangles - and, as you machine the rotors you lose mass, the all important heat sink that makes brakes work....
    On Saturday, July 20, 2019, 07:19:46 PM CDT, Mathieu W. Huovinen via Fot <fot at autox.team.net> wrote:  
 
 


Squaring up the pads? Please tell me more, I'm still learning. Thanks!

-Marhieu
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/quikrx@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190721/2e45cd54/attachment-0001.htm>