[Fot] ATTENTION BOB BRWNES

[robert bownes]

Thanks for asking. I did indeed sit down to measure the intake spacing on
the engine I have out of the car. Much to my surprise I also discovered
that I have both wide and narrow spacing intake manifolds on the shelf! I
didn't think I had any. Looks like I don't have any exhaust manifolds, but
those are all the same according to the folks here.

So now I have no real excuse not to get that project done.

Unless someone here has a nice rotoflex Formula Ford rear end I can use to
distract me. ;)

Thanks,
Bob


For those who are curious, I bought a FF chassis many years ago with an eye
to turning it into a TR powered race car. OF late, I have been doing a bit
of research into it, and it appears to be on of a very small number of Nike
formula fords. There were about 10 MK4's, one MK5, a whole bunch of MK 6's,
and two or three MK10's. There wer a few other one offs, including a FV.
It's not a MK4 or 6, I don't think it is the MK5 (F5000 monster)

Possibly even the sole surviving example of

On Tue, Jul 16, 2019 at 2:28 PM jameselbe--- via Fot <fot at autox.team.net>
wrote:

> Did you find a TR6 Manifolds. If not I have one. Sorry it took so long.
>                                              Jim Elbe
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/bownes@web9.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190716/b7b2fcff/attachment-0001.htm>