[Fot] Early Block

Fri Nov 30 14:37:25 MST 2018

Joe, 

What is the engine number on the block. My TR3 and 4 blocks use bolts to retain the cam bearings.

Brad Eells
Sent from my iPhone

> On Nov 30, 2018, at 11:26 AM, Joe Alexander via Fot <fot at autox.team.net> wrote:
> 
> Kas and All.
> 
> Sean was stripping a block and noticed that there were no Cam Bearing Retainer Hardware. And the center web bridged the width of the block and was machined.
>> 
>> TS1362E
> 
> Clearly, running design changes for a reason. Any insights on this?
> 
> <image1.jpeg>
> 
> 
> <image2.jpeg>
> 
>> 
>> Joe Alexander
>> 4505 Donald Dr
>> Cedar Falls, IA 50613
>> The-vintage-racer.com
>> Gasketinnovations.com
>> Cell:  319.464.4711
>> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr4abrad@gmail.com
> 
> 