[Fot] Valve Cover Fasteners.

[Aaron Johnson]

I manufactured some aluminum knurled ones with a groove in the bottom for an o-ring to help with leaking out of the cover.  

Can make them for a nominal fee for anyone else now that I’m back in the states. 

Aaron 

Sent from my iPhone

> On Mar 28, 2018, at 8:20 AM, Joe Alexander via Fot <fot at autox.team.net> wrote:
> 
> Friends,
> 
> FOT Alexandre Camoletti sent me a message from Switzerland.
> 
> He is rightfully correcting me on the origins of the valve cover fasteners.
> 
> My inspiration for the design actually came from “Wilen”, who produced not only the valve cover fasteners, but the valve cover, which features lateral heat sinks.
> 
> Now I am trying to find out more history on the “Wilen”. Company. This may be far more interesting. I have never heard of Wilen. Perhaps others have?
> 
> Anyway, Alexandre produced some to exacting dimensions. He also sent me the drawings. While I plan to stay the course on our design features, I want to set the history straight.
> 
> Thanks and much thanks to Alexandre.
> 
> Joe Alexander
> 4505 Donald Dr
> Cedar Falls, IA 50613
> Gasketinnovations.com
> Cell:  319.464.4711
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/hpspitfire@gmail.com
> 
>