[Fot] Competition Valve Cover Fastener-Redesign

[Joe Alexander]

Introduction of new Design.

The Triumph Factory made up some knurled aluminum valve cover fasteners in the 50s for their competition cars. Allows quick remove and replace of valve covers. We added an O ring seal feature for oil control in the design.

The first configuration is generic to most TR models, the second configuration is dedicated to the TR6 with engraving and lacquer fill.   Looks good, too.

Accepting orders with no charge for shipping to FOT. Shipping starts next week. Offer good for one week...until next Tuesday.
$15 each Fastener for generic TR.   (except GT6)
$20 each fastener for TR6

PayPal = n197tr4 at cs.com

Might be a good time to get the reusable silicone gasket that is superior in sealing.   Discounted to $15.....regardless of model.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 1730007 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20180327/66341944/attachment-0002.jpeg>
-------------- next part --------------



Or available at Moss, very soon.

Thanks,

4505 Donald Dr
Cedar Falls, IA 50613

Gasketinnovations.com
Cell:  319.464.4711