[Fot] Type A OD pressure test
Greg Blake
gblake58tr3 at icloud.com
Sun Mar 4 18:59:49 MST 2018
All knowing FOT
Attached is a video of my Type A OD unit ready to bolt up to the transmission. I decided to do a pressure test with 120psi of compressed air plumbed into the operating vale port.
The engagement seems to work well when I move the operating lever. But I am concerned about the amount of air that can be heard leaking. I believe it is going past the relief valve. Is this abnormal amount of leaking?
I noticed upon tear down that the nonreturn valve had a 1/4" ball instead of the 5/16" this unit should have had. The test you see in the video is with a new 5/16" ball. I am sure on a previous rebuild someone mistakenly used the later style 1/4".
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Video.MOV
Type: video/quicktime
Size: 2133206 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20180304/0a7fcbda/attachment-0002.mov>
-------------- next part --------------
Just wanted opinions before I buttoned this up to the transmission for some bench testing.
Thanks.
Greg
Sent from my iPhone
More information about the Fot
mailing list