[Fot] Bore gauge

[JAMES GRAY]

I agree with Mordy but will add even with a top quality tool you still need to practice with it until you can repeat the result consistently.

jim g

> On June 28, 2018 at 10:00 AM Mordy Dunst via Fot <fot at autox.team.net> wrote:
> 
>     Machine shops are saavy and have the stuff.  They could do it for you.  
> 
>     Or 
> 
>     “Buy good stuff once and cry once” .  Repeatable accuracy is critical. 
> 
>     MDunsthttp://Headgasket.com 626.358.1616 
>     Fax  626.628.3777 
>     Triple R Munitions, Inc 626.201.9471 
>     T FFL 6,7 SOT 2
> 
>     On Thursday, June 28, 2018, rbtr3a--- via Fot < fot at autox.team.net mailto:fot at autox.team.net > wrote:
> 
> 
>         > > You engine builders I have a question? I’m looking for a bore gauge. I know mityotoyo and Starret are the bench marks. But looking for opinions on other less expensive brands. Ronnie _______________________________________________ fot at autox.team.net mailto:fot at autox.team.net http://www.fot-racing.com Donate: http://www.team.net/donate.html Archive: http://www.team.net/pipermail/fot Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gasket.works@gte.net
> > 
> >     >     _______________________________________________
>     fot at autox.team.net
> 
>     http://www.fot-racing.com
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/fot
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180628/12cedd03/attachment-0001.htm>