[Fot] IRS Axle Query

[Robert Lang]

Marcel - if the AXLE is actually moving out, you may have inner axles that have been modified. The stock setup uses a shoulder on the differential side of the axle to prevent the axle "walking" but I have seen folks turn the axles down to remove the bearing and seal so-as to replace the seal. This usually happens when you can't get the drive flange off the axle stub but you are trying to fix the leaky axle stub seals.
If the DIFF is walking around - check the mounts. There's probably a broken mount pin or pin mounting. This is very common on IRS cars.
Regards,Bob Lang
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180713/343a2019/attachment.htm>