[Fot] D Type Overdrive

[Jack Wheeler]

 I found that the plain old 'Aviation' Permatex worked just fine for this application.  Never had one leak.
Jack

    On Wednesday, September 13, 2017, 10:59:01 PM EDT, Tony Drews via Fot <fot at autox.team.net> wrote:  
 
 Hylomar is often used where there are no gaskets.

Tony Drews

At 06:12 PM 9/13/2017, Joe Curry via Fot wrote:

I am undertakingthe refurbishment of a D-Type overdrive unit and I see that there is nogasket between the brake ring and the halves of the case assembly. The Haynes manual specifies using “jointing compound” on the matingsurfaces.  What is the recommended stuff that is available today forthis purpose?
 
Thanks,
Joe C.
 
Sent from my HAL-9000
 
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate:http://www.team.net/donate.html
Archive:http://www.team.net/archive
Forums:http://www.team.net/forums
Unsubscribe/Manage:http://autox.team.net/mailman/options/fot/tony@tonydrews.com

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170923/1d4763e5/attachment-0003.htm>