[Fot] Tr6 transmission mount position

[Jack Wheeler]

They were basically the same, but in 1973, they changed the mounting points on the frame to accommodate the J-Type opverdrive.  Therefore, to use a non-overdrive or A-Type opverdrive, you have to use a special adapter bracket that wasn't used on earlier frames.  The mounts on the later models with the J-Type overdrive were 2 round rubber mounts verses the single rectangular rubber mount used on earlier and non-overdrive models.  I think I still have one of these brackets left over from my racing days.  I used a later TR-6 frame under my TR-4A.

Jack
 

    On Thursday, September 14, 2017, 2:37:38 PM EDT, Mordy Dunst via Fot <fot at autox.team.net> wrote:  
 
 Is the tr4 and tr6 transmission chassis mount in the same  position? 
Thanks


MDunstHeadgasket.com626.358.1616 Fax 626.628.3777 Triple R Munitions, Inc626.201.9471 TFFL 6,7 SOT 2_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170923/020aa47a/attachment-0001.htm>