[Fot] GT6 Mk II Frame?

[Jerry Van Vlack]

I spoke to Scott a week ago and he will be away for a few weeks starting this Monday the 13th, you might try him today however it will be 2 weeks before he said he’d be back.
JVV

From: Bruce Lapierre via Fot 
Sent: Friday, November 10, 2017 8:52 PM
To: sbarr at McCarty-Law.com ; fot at autox.team.net 
Subject: Re: [Fot] GT6 Mk II Frame?

Try Scott Harper - - - Team Triumph


-----Original Message-----
From: Barr, Scott via Fot <fot at autox.team.net>
To: 'FOT' <fot at autox.team.net>
Sent: Fri, Nov 10, 2017 8:10 pm
Subject: [Fot] GT6 Mk II Frame?


Hey, I gotta ask – does anybody have a good GT6 Mk II frame lying around that they don’t need?  

I’m working on my dad’s Mk I GT6 race car, deleting the swing axles, and need the rotoflex-type frame.  His solution (a reasonable one) was to take a spare GT6 Mk III frame that I had lying around and use that.  But there are some complications with bolting the Mk I body and bonnet to the Mk III frame, so if somebody’s got a Mk II frame around, it might make sense to start with that instead.  

Scott (B.)
_______________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20171111/eaeba52d/attachment-0001.htm>