[Fot] GT6 Triple Weber intake?

[Spitfire Racing]

Brian, he’s going to spend quite a bit on that setup, especially for a street car. Richard Good has a great triple manifold for using three Strombergs or three SU HS-6 carbs. I can send pictures of the triple SU setup and Bruce Stutzman has the triple Stromberg setup on his TR-6.  If he’s after some eye candy under the hood, those will do it for way fewer dollars invested. Once he buys the Weber components then he also needs to buy assortments of jets and air correctors to tune them. Hopefully he realizes one doesn’t just bolt on Webers. To get reasonable benefit from them he also needs cam; compression; and some alteration to the distributor curve, not to mention headers and exhaust system. Then once he has all this extra horsepower paid for I do hope the rest of the drivetrain is up to the task. There’s also the new issue then of cooling due to the extra heat potential on the mods.

If he’s committed to this modification he can contact: http://www.piercemanifolds.com/               

 

I hope he understands what is ahead. This will put serious hurt on the bankbook.

 

Russ Moore

Spitfire #49

 

 

 

               

 

From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Brian Schirano via Fot
Sent: Wednesday, March 29, 2017 10:16 PM
To: FOT List
Subject: [Fot] GT6 Triple Weber intake?

 

Hey Triumph friends

 

I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck.

 

Any sourcing suggestions I can pass on to him? I don't run one myself.

 

Thanks in advance

Brian

  

26A GT6+, 28 TR6

Brian Schirano
585-305-0349 Cell 
BSchirano at yahoo.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170330/e2701ce2/attachment-0001.htm>