[Fot] TR4 ARP Flywheel Bolts Question

[Yellow04]

This has worked for me for years. Had a Moldex made with 8 bolt holes, no dowels. I use one of those lightweight steel flywheels we had made up about 15 years ago with grade 8 fasteners, no washers and red Locktite. 

Henry Frye, currently building an engine for Old Blue using these bits

> -----Original Message-----
> From: Steve Yott
> Subject: Re: [Fot] TR4 ARP Flywheel Bolts Question
> 
> Now the absolute best thing is to not use an aluminum flywheel!  There is a
> reason they are not allowed in Europe…..  Buy a steel flywheel and  use 6 to 8
> bolts then most of the issues are gone.