[Fot] TR4 ARP Flywheel Bolts Question

[davehogye]

Hi Steve, 
As Tony said, install them and check the clearance. If you are using an aluminum flywheel, then you will want to use washers, number 8s hard, Loctite is a good idea too. With a steel flywheel, washers are not as important. Loctite is still good when in doubt. 

DH 

----- Original Message -----

From: "STEPHEN BOROWSKI via Fot" <fot at autox.team.net> 
To: "FOT List" <fot at autox.team.net> 
Sent: Friday, June 2, 2017 1:27:49 PM 
Subject: [Fot] TR4 ARP Flywheel Bolts Question 

Does anyone have experience using the ARP flywheel bolts sold by Moss and others? 
I understand that you may have to shorten the bolt or it breaks the rear seal??? 
Are they supposed to have a washer or not? 

Thxs. Steve 

_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye@comcast.net 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170603/addfda95/attachment-0001.htm>