[Fot] TR6 Clutch Slave Cylinder Position
Peter Vucinic
pvucinic at netspace.net.au
Sat Jan 28 01:36:59 MST 2017
Hi All,
I am chasing a few dimension of the location of the Clutch Slave Cylinder on
the TR6 engine. Hoping someone will be able to assist as it will save me
quite a bit of time assembling up and engine and gearbox!
I'm building a 'winged' race sump for the 6cyl and am trying to figure out
how much room I need to leave for the clutch slave cylinder.
Just need some rough measurements to get me going!
Many thanks
"You can Make a Small Fortune From Motor Racing. As long as You Started With
A Lage Fortune!"
Kind Regards
Peter Vucinic
TR4 - TR7 V8 - Spitfire MkII
_______________________________________________
<mailto:fot at autox.team.net> fot at autox.team.net
<http://www.fot-racing.com/> http://www.fot-racing.com
Donate: <http://www.team.net/donate.html> http://www.team.net/donate.html
Archive: <http://www.team.net/archive> http://www.team.net/archive
Forums: <http://www.team.net/forums> http://www.team.net/forums
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170128/b16a6f69/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TR6_Engine_Slave_Cylinder_Dimensions.jpg
Type: image/jpeg
Size: 58132 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20170128/b16a6f69/attachment-0002.jpg>
More information about the Fot
mailing list