[Fot] TR type A OD

[van.mulders.marcel at telenet.be]

I believe there are 2 types of the mainshaft for an A-type O/D gearbox of the TR6. The change is somewhere in the 1972 model en
later on a J-type was fitted. Part no of the latest A-type main shaft is UKC1933. It has the smaller tip to the inputshaft bearing.
Marcel
----- Oorspronkelijk bericht -----
Van: "fot" <fot at autox.team.net>
Aan: "fot" <fot at autox.team.net>, "Greg Blake" <gblake58tr3 at icloud.com>
Verzonden: Zondag 24 december 2017 13:59:08
Onderwerp: Re: [Fot] TR type A OD

Greg,

You're not using the excellent article on the A type overdrive found on the Buckeye Triumphs technical site. 

Ed Woods
> On December 23, 2017 at 10:50 PM Greg Blake via Fot <fot at autox.team.net> wrote:
> 
> 
> I am attempting to rebuild an A type OD over the holiday weekend. I tried to separate the rear OD housing from the main OD housing after removing the rear output flange and speedo drive. Once i removed the 6 nuts and washers, I had to tap the studs with a brass drift to get the rear housing to separate from the main housing. But now i can't get the rear OD housing to come completely off. I can get about a 1/4" gap between the rear and main housing but it won't come all the way off. What am I doing wrong?
> 
> Thanks. Greg
> 
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fogbro1@comcast.net
> 
>
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be