[Fot] Which Roller Rockers for racing TR4

[Greg Blake]

I use what Tony described. You can spend some time with the grinding stones following Kas' instructions and after 2-3 beers you'll have a nice set of rocker arms. 

I've often wondered how the shaft holds up over time with the roller rocker needle bearing setup. Seems like oil fed bushing (stock setup) spreads the load to the shaft way better than needle bearings.

Sent from my iPhone

> On Sep 2, 2016, at 6:14 PM, Tony Drews <tony at tonydrews.com> wrote:
> 
> Stock rockers can work fine, that's what Jack ran.  Do a hardened rocker shaft, alloy pedestals with outriggers to hold the outer end of the rocker shaft.
> 
> Regards, Tony
> 
> At 10:52 AM 9/2/2016, STEPHEN BOROWSKI wrote:
>> Hello All,
>> Are Roller Rockers really worth the effort & price? Which ones ? What's the best set up for the TR4?
>> 
>> Thxs. Steve
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gblake58tr3@icloud.com
> 
>