[Fot] TR4 Motor & Transmission Mounting

Wed Oct 12 01:46:39 MDT 2016

Hi,

We use the Land Rover mountings on all our competition cars. Original part number ANR1808 (130985HD)

Cheers,

Thomas Boyd

TR Enterprises

Dale Lane

Blidworth

NG21 0TG

01623 793807

 <http://www.trenterprises.com/> www.trenterprises.com

 <http://www.triumphspecialtuning.com/> www.triumphspecialtuning.com

From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Tony Drews
Sent: 12 October 2016 01:37
To: Stephen Borowski <biznzman at pacbell.net>
Cc: fot at autox.team.net
Subject: Re: [Fot] TR4 Motor & Transmission Mounting

I've used heavy duty front mounts from Cambridge in the UK.  The standard ones I'd kill in a year or two, these have been in the car for probably 10 years and are rock solid.  Shipping was almost as much as the mounts themselves.

Tony Drews

At 06:44 PM 10/11/2016, Stephen Borowski wrote:

Hello All,
I was thinking of moving the entire drive train appx 1 inch back but have changed my mine. I didnâ€™t know the sanctioning bodies would not approve. Its not worth the hassle!

I did find out that the old TR Bits does sell upgraded front motor mounts. About $40 each. Has any one used them or something close to this?  

Thxs. Steve

On Oct 10, 2016, at 2:52 PM, Jim Gray <toodamnfunky at comcast.net <mailto:toodamnfunky at comcast.net>  > wrote:

I don't know why you would need to.
I have an IRS car with coil overs on the front and made adjustable spring perches for the rear, I use a lightweight battery behind the passenger seat and my car corner weights to 49.9% cross weight. I could have nailed it to 50% but settled for the .1% off
It's surprising how well these cars will balance without a lot of effort.
Jung

Sent from my iPhone

On Oct 9, 2016, at 8:52 AM, Chip Collingwood < chip at theukmotorsports.com <mailto:chip at theukmotorsports.com> > wrote:

better check your sanctioning body.....it's usually not an approved modification.

you would be surprised what an inch difference in weight placement makes in the corner weighting of a car, especially the engine and trans. If you've ever used a tongue scale to balance your trailer load you can imagine what moving the engine and trans will do to a 2000lb car.

Chip Collingwood
theukmotorsports.com <http://theukmotorsports.com/> 
(804) 564-1839

On Sun, Oct 9, 2016 at 8:57 AM, Richard Taylor <tarch at bellsouth.net <mailto:tarch at bellsouth.net> > wrote:

Moving the engine mounting point is not likely to move the CG.

Richard L.Taylor,Jr.,  FAIA

TAYLOR     ARCHITECTURE

112 Krog Street, Suite196

Atlanta,    Georgia   30307

Tel.              (404) 223-1313 <tel:%28404%29%20223-1313> 

FAX             (404) 223-1312 <tel:%28404%29%20223-1312> 

Cell              (404) 660-4920 <tel:%28404%29%20660-4920> 

  taylor-architecture.com <http://taylor-architecture.com/> 

   tarch at bellsouth.net <mailto:tarch at bellsouth.net> 

-----Original Message-----

From: Fot [ mailto:fot-bounces at autox.team.net <mailto:fot-bounces at autox.team.net> ] On Behalf Of Stephen Borowski

Sent: Sunday, October 09, 2016 7:57 AM

To: FOT Triumph

Subject: [Fot] TR4 Motor & Transmission Mounting

Anyone have any experience with moving the engine mounting rearwards to

possibly improve weight ballance?

Any improvements to just the engine or transmission mounts?

Thxs Steve

Florida HURRICANE racing this week

_______________________________________________

fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com <http://www.fot-racing.com/> 

Donate: http://www.team.net/donate.html

Archive: http://www.team.net/archive

Forums: http://www.team.net/forums

Unsubscribe/Manage:

http://autox.team.net/mailman/options/fot/tarch@bellsouth.net

_______________________________________________

fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com <http://www.fot-racing.com/> 

Donate: http://www.team.net/donate.html

Archive: http://www.team.net/archive

Forums: http://www.team.net/forums

Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/chip@theukmotorsports.com 

_______________________________________________
fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com <http://www.fot-racing.com/> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net

_______________________________________________
fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com <http://www.fot-racing.com/> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/biznzman@pacbell.net

_______________________________________________
fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com <http://www.fot-racing.com/> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony@tonydrews.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20161012/50afe9f7/attachment-0001.htm>