[Fot] TR4 valve springs for .549 lift ?

[Jim Gray]

Brian Howlett at BFE confirmed his Comp isky springs work at .549. On that
note Brian is in business as BFE and  fully operational. He's raced a TR4
powered Morgan for 45+ years
And really knows these motors.
Is Brian a member ?? If not I'd like to nominate him.
Jim G.

-----Original Message-----
From: Tony Drews [mailto:tony at tonydrews.com] 
Sent: Saturday, November 12, 2016 3:18 PM
To: toodamnfunky at comcast.net; fot <fot at autox.team.net>
Subject: Re: [Fot] TR4 valve springs for .549 lift ?

That seems about what I'm running for lift.  I'm running springs from BFE
and they don't bind.  They seem close to the TR-4 springs sold by Crower - I
ended up with Crower titanium retainers when BFE went offline (it's back
under new ownership).  Isky also has a spring set for TR-4, not sure if
those support that lift but I'm guessing they do.

www.BritishFrameandEngine.com / BFEparts at aol.com

Regards, Tony

At 12:52 PM 11/10/2016, toodamnfunky at comcast.net wrote:
>FoT,
>I'm changing cam spec this year and the new cam will lift at the valve 
>to .549.
>Can anyone suggest a source for valve springs that will work with .549 ?
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com