[Fot] TR4 lower wishbone bushings

[Dave]

Hi Bill,
The outer bushings are honed to fit the new trunnion.

// Dave 

Sent from my iPad

> On Nov 8, 2016, at 9:42 AM, Bill Babcock <ponobill at gmail.com> wrote:
> 
> When you say bushing, are you referring to the distance piece— 661-790? That is not supposed to rotate freely on the trunnion. The bearing surface is between the piece that goes over the trunnion arm and the poly or nylon bushing. 
> 
> 
>> On Nov 8, 2016, at 9:27 AM, Dave <dlhogye at comcast.net> wrote:
>> 
>> Hi Bob,
>> I had a machine shop hone them after I installed the bushings.  Low cost and done correctly.  
>> 
>> Dave H.
>> 
>> Sent from my iPad
>> 
>>> On Nov 7, 2016, at 6:02 PM, Bill <ponobill at gmail.com> wrote:
>>> 
>>> You shouldn’t need to ream them, the bushings I have always used fit as is. 
>>> 
>>> 
>>>> On Nov 7, 2016, at 1:21 PM, Robert Blake <rblake36 at yahoo.com> wrote:
>>>> 
>>>> I am installing new bushings on the lower wishbones of my TR4 and my challenge is now to hone them to the right ID to fit properly on the trunnion.  I have not been able to find a hone small enough to fit the bushings.  Any suggestions would be welcome. 
>>>> 
>>>> Cheers,  Bob Blake
>>>> _______________________________________________
>>>> fot at autox.team.net
>>>> 
>>>> http://www.fot-racing.com
>>>> 
>>>> Donate: http://www.team.net/donate.html
>>>> Archive: http://www.team.net/archive
>>>> Forums: http://www.team.net/forums
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill@ponostyle.com
>>>> 
>>>> 
>>> 
>>> _______________________________________________
>>> fot at autox.team.net
>>> 
>>> http://www.fot-racing.com
>>> 
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye@comcast.net
>>> 
>>> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20161108/40fdee85/attachment-0001.htm>