[Fot] TR6 Piston to Head Clearance

[Steve Yott]

In my humble opinion….. you are at the minimum but it should work….

 

But some would say….  Make it so tight that carbon can’t build up on the head in the area of the piston  :)

 

Steve Yott

 

From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Robert Lang
Sent: Tuesday, May 24, 2016 8:44 PM
To: fot at autox.team.net
Subject: [Fot] TR6 Piston to Head Clearance

 

Hi,

 

Does .030 piston to head clearance sound okay for a TR6 motor?

 

I measured using modeling clay.

 

Regards,

Bob Lang

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160524/b9e85f90/attachment-0001.htm>