[Fot] Tractor motors

[Jim Gray]

Dennis,

I'm sure your going to get a bunch of different answers on this but I've
always had good luck with a real thin

layer of silicone on both sides. I use it for the thermal expansion &
contraction and the flexibility of silicone

vs. a hard shellac. I know many have had success with hylomar as well.

The other benefit is the gaskets are easier to remove & reuse. I use Mordy's
base gaskets.

Jim g

 

From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Dennis DeLap
Sent: Saturday, March 26, 2016 8:40 AM
To: FOT at autox.team.net FOT at autox.team.net <FOT at autox.team.net>
Subject: [Fot] Tractor motors

 

A   M   I   C   I
With regard to sealing the liner at the figure 8 gasket - is Indian Head
gasket shellac compound still a viable option?
Survey says?
Thanks 
Dennis 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160326/c7954322/attachment-0001.htm>