[Fot] crank dampers

[Bill Tobin]

Brian, a couple years ago I sent mine to the Damper Doctor, in California. They did a great job on it.
I put marks on the damper every 60 degrees from the TDC mark to make a half-baked degree wheel; works great for adjusting valves. Set to TDC, adjust number 1, turn to the next mark and adjust 5, and so on down the firing order.
Cheers, Bill
  ----- Original Message ----- 
  From: Brian Schirano 
  To: FOT List 
  Sent: Thursday, August 18, 2016 9:42 AM
  Subject: [Fot] crank dampers


  Hi FOT'rs


  As a short term means to an end I need to install a stock crank damper on my GT6. 


  I'd like to upgrade (later) but quick look around showed API, no Triumph damper, Richard Good has a set up but the I'd be forever having to remember I cannot use a stock water pump pulley, other than that, all I see are rebuilds and stock versions.


  Input? 


  Thanks
  Brian



  26A GT6+, 28 TR6
  Brian Schirano
  585-305-0349 Cell 
  BSchirano at yahoo.com


------------------------------------------------------------------------------


  _______________________________________________
  fot at autox.team.net

  http://www.fot-racing.com

  Donate: http://www.team.net/donate.html
  Archive: http://www.team.net/archive
  Forums: http://www.team.net/forums
  Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160818/1aea4518/attachment-0001.htm>