[Fot] TR Front End Lower Arm Use

[J.C. Hassall]

Yup, did it on my TR4 (per Kas' book), which lowered the frame 0.5 inches.  On each side just swap the arms, no need to go side to side.  Also drill the innermost hole and use a 3/8" bolt, it'll make installing the spring pan a lot easier

jim

Fat-thumbed from my iPhone

> On Nov 23, 2015, at 2:20 PM, STEPHEN BOROWSKI <biznzman at pacbell.net> wrote:
> 
> Hello All,
> Does anyone have experience with turning their lower A-arms upside down to gain a possible advantage in lowering the frame?
> All comments welcome!
>  
> Thxs. Steve
> Florida TR4 Racing
>  
> 
>  
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhassall@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20151123/50ce2a17/attachment-0001.htm>