[Fot] tuftrided rocker shaft finish

[Mike Munson]

The first thing you should do with that shaft is make sure the oil passage isn't clogged. I have seen several of them clogged with salt? And the damaged rockers that resulted from lack of oil. 

Mike Munson 
#28 EP TR6


> On Mar 20, 2015, at 9:24 AM, Jason Sukey via Fot <fot at autox.team.net> wrote:
> 
> I'm installing a new rocker shaft in the GT6 - Heavy Duty tuftrited shaft from BPNW- 
> After cleaning, there is still a gray matte finish on the surface.  I'm wondering if I should polish this to a finer finish or if this finish is helping to retain oil.  I'm leaning towards polishing to as smooth as possible, but am looking for any experience with this from the list.
> 
> Thank you,
> 
> Jason Sukey
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
> 
>