[Fot] Excessive Camshaft Endplay

[Tim Murphy]

I have .014 endplay on the cam and the spec is .004 to .0075.  I can either
add a shim to the front of the cam, machine about .010 off of the face of
the front cam bearing or leave it as is and not be concerned.  I checked
Moss and apparently shims are not available through them. I can make a shim
but putting a shim on the front thrust face of the cam doesn't seem like a
good idea.

 

What have others done to solve this problem?

 

Thanks,

Tim Murphy 1961 TR4 #317 BRG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150321/c66b7bb7/attachment.htm>