[Fot] Overheated parts

[Kas Kastner]

Money is the question, along with time. Money to replace and time until you
need the engine to race. If, as Marcel has mentioned, the bearing surfaces
are okay and the parts still measure out properly then to me it hard to
imagine that a blue BILLET STEEL crank and BILLET STEEL rods will not still
be a lot better than the stock crank and stock rods which may also
be suspect. Measure this chance against any alternative you have.

*Never be beaten by equipment.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150625/71fe93a1/attachment-0001.htm>