[Fot] Triumph tie rod cup

[Scott Janzen]

I use the original steel cups.  Disassembled, inspected and adjusted my GT6 rack this past winter.  Procedure described in manual is good; shims for adjustment of cups and rack free play are available from the better suppliers.   I found that with the wear in the center of the rack, I had to set for bind at the far left and right and then the center is a little loose.  Do it the other way and the rack won't move at the extremes.

On Jun 14, 2015, at 5:26 PM, Brian wrote:

What are folks using in gt6 & spitfire steering racks for the cup the tie rod goes into on the rack? I used to run the steel cups but had an issue and put in a plastic cup. The plastic cup has play in it after not much use.
Thanks,
Brian
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen@me.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150614/13c6b803/attachment-0001.htm>