[Fot] Fw: Ignition wires?

[Jim Gray]

I went with the accel wires too because I could buy a generic V8 kit locally
but also learned I needed accel the crimping tool to get reliable end 

connections. 

jim g

 

  _____  

From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Bill Tobin
Sent: Monday, June 01, 2015 10:16 PM
To: Brian Schirano; FOT List Triumph
Subject: Re: [Fot] Fw: Ignition wires?

 

Brian, I bought a set from Jeg's, Accel, I think. 8mm, cut to your own
length. They come in a set of 8, so you can have a couple spares.

Not horribly expensive and work great.

Cheers, Bill

----- Original Message ----- 

From: Brian Schirano <mailto:bschirano at yahoo.com>  

To: FOT List Triumph <mailto:fot at autox.team.net>  

Sent: Monday, June 01, 2015 8:59 PM

Subject: [Fot] Fw: Ignition wires?

 

 

Hi Guys


Apologies on the many questions since I joined FOT, but it's an expensive
sport to learn by trial and error, so much prefer to collect your opinions
when I don't know the answer short hand.

Thanks for your help to date, looks like I will use intake retainers across
all valves but add full Roller Rocker assy from Richard Good

Next question, looking for ignition wire suggestions, Cobalts from Moss or 
Magnecores? Or ?? I run a Pertronics distributor and an Accel Super coil, 



No MSD.

Thanks
Brian


69 GT6+ #26A
73 TR6 #28

Brian Schirano
585-305-0349 Cell=A0
 <mailto:BSchirano at yahoo.com> BSchirano at yahoo.com

 


  _____  


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150602/f6a91ac8/attachment.htm>