[Fot] Uprated stub axle kit / shims

[Allen Washatko]

I needed much more. I made solid spacers on the lathe.

Allen
On Jul 28, 2015, at 8:22 PM, Dan Cronin wrote:

> Am putting the up-rated stub axle kit on my TR2 with TR6 front  
> suspension / disc brakes and find that I need nearly 0.030 in shim  
> thickness to allow the disk / wheel to turn without too much  
> effort.  The instructions say to start with 0.015 and then (usually)  
> reduce to around 0.007 and then install the grease seal, inner  
> bearing, spacer, shim pack, outer bearing, washer and nut torqued to  
> 45–50 ‘#.  Anyone else finding they need to use considerably more in  
> the way of shims than the instructions indicate?
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/awashatko@wi.rr.com
>
>

Allen Washatko
#6 Triumph TR6




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150728/6f87d460/attachment-0001.htm>