[Fot] TR4A/ TR6 inverting lower wishbones ?

[Todd Redmond]

Did it on my TR 3. Gained .5 inch. 

Thanks
Todd Redmond

> On Jul 17, 2015, at 8:33 PM, Jim Gray <toodamnfunky at comcast.net> wrote:
> 
> Greetings
> I’m fitting coilovers to the front of the car and I need to find some more shock travel, I’m too close to bottom now.
> I plan to shim the entire spring pan down to 1” with aluminum bar stock to extend the shock.
> I have heard you can also invert the wishbones and swap sides ( left to right ) and I was wondering if anyone has ever done it.
> Just by some rough measurements I should be able to gain an addition 5/8” of shock travel with that alone.
> Has anyone done it ?
>  
>  
> jim g
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/alfetta95@optonline.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150718/1552133c/attachment-0001.htm>