[Fot] TR4A/ TR6 inverting lower wishbones ?

[Joe Alexander]

I think Gary Wiezorek  did that.

Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Jul 17, 2015, at 7:33 PM, Jim Gray <toodamnfunky at comcast.net> wrote:
> 
> Greetings
> I’m fitting coilovers to the front of the car and I need to find some more shock travel, I’m too close to bottom now.
> I plan to shim the entire spring pan down to 1” with aluminum bar stock to extend the shock.
> I have heard you can also invert the wishbones and swap sides ( left to right ) and I was wondering if anyone has ever done it.
> Just by some rough measurements I should be able to gain an addition 5/8” of shock travel with that alone.
> Has anyone done it ?
>  
>  
> jim g
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150717/58b8d7ac/attachment-0001.htm>