[Fot] Cometic TR6 Head Gaskets?
Charly
charly at mitchelplumbing.com
Sun Aug 16 11:37:36 MDT 2015
I've tried the copper and are very hard to seal. I'm now using a less expensive gasket, not Payen or Lucas branded. They seem to seal and last longer, I always use an e
an early TR6 gasket.
Charly Mitchel
TR6 #44
http://www.bpnorthwest.com/wholesalea/triumph/tr250-tr6/engine-gaskets-seals/head-gasket-flat-tr250-tr6-68-to-71.html
On Sun 16/08/15 10:31 AM , Robert Lang robertlangtr6 at yahoo.com sent:
> Hey,
> I'm running about 12:1. Not sure the exact C/R - I'll check the CCs
> when I have the head off this time.
> I've been running Payen early TR6 gaskets. At least I'm pretty sure
> they've all been Payen. The first one lasted for 7 or 8 autocross
> seasons (15 or so events a year) plus a coupe of hillclimbs.
> As for the air fuel mixture, it's in the rich side of things, but not
> pig rich. Plug cuts are tan.
> I re-torqued after the initial run-in. All surfaces were clean.
> I'll try Cometic this week. Else, I might think about copper.
> Thanks for the feedback.
> Film at 11.
> l8r, Bob Lang
> On Sunday, August 16, 2015 12:57 PM, Charly wrote:
> What compression ratio are you guys running? I haven't blown a head
> gasket in quite a while.
> Charly Mitchel
> TR6 #44
> On Sun 16/08/15 7:56 AM , Mike Munson fasttrs at yahoo.com sent:
> > Sorry to hear that Bob! I feel your pain! I went through that a lot
> > before I started using Payen early model gaskets. 0 deck block/ no
> > compression ring.
> >
> > Mike Munson#28 EP TR6
> > On Aug 16, 2015, at 9:18 AM, Steve Yott wrote:
> > I would give them a call as they can make just about anything!
> > They are great gaskets if you want to run an MLS style.
> > Steve Yott
> > FROM: Fot [] ON BEHALF OF Robert Lang
> > SENT: Sunday, August 16, 2015 8:51 AM
> > TO: Friends of Triumph
> > SUBJECT: [Fot] Cometic TR6 Head Gaskets?
> > Hi,
> > Another day at the track, another head gasket. :-(
> > I hear good things about Cometic MLS - but I see nothing indicating
> > that they have anything for TR6.
> > Can anyone enlighten me?
> > Regards,
> >
> > Bob Lang
> >
> > Cell 339-927-4489
> > p.s. Khartu for the win,
> > though!_______________________________________________
> > http://www.fot-racing.com [5]
> >
> > Donate: http://www.team.net/donate.html [6]
> > Archive: http://www.team.net/archive [7]
> > Forums: http://www.team.net/forums [8]
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com [9]
> >
> >
> > Links:
> > ------
> > [5] http://www.fot-racing.com
> > [6] http://www.team.net/donate.html
> > [7] http://www.team.net/archive
> > [8] http://www.team.net/forums
> > [9] http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
> >
> >
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/robertlangtr6@yahoo.com
>
>
More information about the Fot
mailing list