[Fot] Fwd: Cams Available

[Joe Alexander]

FOT:

This comes from Ken Knight. The effort here is have a continued supply of the Tilden cam designed by Larry Young. Some of us have already purchased one as a back up.

There is also an adjustable cam gear that can also be purchased from Ken.

Additionally, Ken has done a run of alloy distributor pedestals for the wet sleeve engine.

Look for more stuff from 3DR in the future.

Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> 

>  
> From: Kenneth Knight [mailto:kknight at klaenv.com] 
> Sent: Friday, August 07, 2015 9:46 AM
> To: FOT (fot at autox.team.net)
> Subject: Cams Available
>  
> Calling All Racers!
>  
> I have made a small run of the Tilden 298Dx racing cam.  (Thank you Larry Young at Tilden for making the master available!)  These cams are ground on new cores.
>  
> Specs:  Cam Lift .376/Lift at valve .556 gross, .537 net/lobe separation 108 degrees, made to run with stock TR lifters.  The price is $595.00 plus shipping/insurance (about $27.00 to most US addresses).  I have two left ready to ship and more will be produced.  I can pdf a full spec sheet.
>  
> Adjustable Cam Gear:  Available and can ship with cam.  This gear has been lightened 15% over stock weight for racing and comes with ARP cam bolts ready to safety wire.  $220.00
>  
> Aluminum Distributor Pedestals:  Still available and they save 2.5 pounds, CNC made in USA.  Requires drive gear for tach to be removed, and I will do this as part of purchase.  I have a stock of drive gears ready to go with pedestal and you send your old drive gear back or I will machine yours.  Price $122.95 w/flat rate shipping, US.
>  
> Everyone have a safe, fun and fast weekend racing!
>  
> Cheers
>  
> Ken Knight
> 3DR
>  
>  
>  
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150807/670e3ec7/attachment.htm>