[Fot] Lucas break in oil

[Brian Schirano]

Interesting, I was recently getting opinions onRotella locally, as I've heard from a couple of guys they run it in this andthat HP motors on a regular basis (non Vintage guys), not just breakin. I sent a note to Shell andthey say “T6 5W-40 has approximately 1280 parts permillion of ZDDP”.  This is aboutthe same as the Mobil One I run. That said a local detractor said it has toomuch detergent in his opinion.


SOoooo – that’s all I can say, no firsthandexperience, but am considering running it. I like the discussion, and BTW the Rotella isn't particularly cheap, have to watch em, it's a 4 qt jug vs most others are 5 qt.


ThanksBrian Brian Schirano
585-305-0349 Cell 
BSchirano at yahoo.com
      From: Bill Dentinger via Fot <fot at autox.team.net>
 To: Duncan Charlton <duncan.charlton54 at gmail.com> 
Cc: "fot at autox.team.net" <fot at autox.team.net> 
 Sent: Saturday, April 11, 2015 8:18 PM
 Subject: Re: [Fot] Lucas break in oil
   
I don't have an ax to grind with Lucas Oil products, but I sure do endorse Shell Rotella as a race engine break-in oil.  I always used it exclusively in the diesel engine in my tow vehicle, and we used it to break in race engines as well.

Bill Dentinger
  

Sent from my iPad

> On Apr 11, 2015, at 6:35 PM, Duncan Charlton via Fot <fot at autox.team.net> wrote:
> 
> I am likewise a distrustful of Lucas oil.  The gear lube display often seen on the counter at auto parts stores demonstrates the climbing effect of their lube and they claim this makes it better than conventional gear lubricants, however, an experimental demonstration posted on the bobistheoilguy website revealed that the lube picked up a large mount of air compared to 'regular' gear lube.  It makes me distrust their other products.
> 
> I've used high quality assembly lube, broken in the cam properly, and then did break in miles with Rotella.
> 
> Duncan
> (Texas)
> 
>> On 4/11/15 5:58 PM, Glenn Franco via Fot wrote:
>> I don't subscribe to the Lucas aura. The lubrication additives I have found end up in the pan and have the consistency of hard Jello. I called Lucas and they couldn't put me in contact with an engineer that could explain why their products do this.
>> 
>> When I build an engine with a new cam and lifters I use Shell Rotella 15w40 exclusively.
>> 
>> I have used their (Lucas) assembly lube (sticky slimey stuff) with no issues however.
>> 
>> 
>> 
>> 
>> 
>> 
>>> On 4/11/2015 6:01 PM, Greg And Alison Blake via Fot wrote:
>>> Has anyone used the Lucas break in oil? I've used joe Gibbs in the past but the price advantage of the Lucas is about 3:1.
>>> 
>>> Thanks
>>> 
>>> 
>>> _______________________________________________
>>> fot at autox.team.net
>>> 
>>> http://www.fot-racing.com
>>> 
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gaf3@charter.net
>> 
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54@gmail.com
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/billdentin@aol.com


> 
> 
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bschirano@yahoo.com




  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150412/4f276789/attachment-0001.htm>