[Fot] FW: MKIII Bonnet & Valance

[Diesel Performance Parts - Info]

Mark aka ,

Well by your lack of a response from my e mail dated 9.10.14 I guess you knew
you were screwing me when you replied to my email initially.

That's fine just but remember you may not be racing anymore and maybe you are
getting out of the Triumph world too. BUT people that do what you are did and
are most likely doing more of get what they deserve one way or the other. I do
have the satisfaction of knowing you will be dealt with, most likely in a much
worse manner than you dealt with me.

I will post this to the FOT board too.  I don't want anyone else to get
screwed like you did to me.

Mark Craig
Diesel Performance Parts, INC.
411 Allied Drive
Nashville, TN 37211
866-455-7788 Phone
615-834-9923 Fax

www.dieselperformanceparts.com
-----Original Message-----
From: Diesel Performance Parts - Info
Sent: Wednesday, September 10, 2014 7:50 AM
To: 'openwheeldriver at frontiernet.net'
Cc: Diesel Performance Parts - Info
Subject: RE: [Fot] MKIII Bonnet & Valance

If you look at the e mail below you sent to me when I asked the FOT member
board about bonnets you said that yours was NOS. To me and most car folks that
stands for "New Old Stock". As in never installed on a car and or used in any
method.

This bonnet has front end damage that has been repaired, minor rust in the
front end and road grime from being used. What do you mean by NOS?

Mark Craig
Diesel Performance Parts, INC.
411 Allied Drive
Nashville, TN 37211
866-455-7788 Phone
615-834-9923 Fax

www.dieselperformanceparts.com
-----Original Message-----
From: openwheeldriver at frontiernet.net
[mailto:openwheeldriver at frontiernet.net]
Sent: Monday, August 18, 2014 6:02 AM
To: Diesel Performance Parts - Info
Subject: Re: [Fot] MKIII Bonnet & Valance

Hi Mark I have a NOS GT6+ Bonnet and a used valance just sold My GT6R Lemans
racecar in NY Mark
----- Original Message -----
From: "Diesel Performance Parts - Info" <info at dieselperformanceparts.com>
To: <fot at autox.team.net>
Sent: Sunday, August 17, 2014 10:01 PM
Subject: [Fot] MKIII Bonnet & Valance


> Evening members,
>
> Just bought a 1969-70 Spitfire SCCA racer and need a good steel bonnet
> and valance to make it "legal" has fiberglass one right now. Would
> love a GT6 bonnet if possible. I can do body work but am not after a
> rusty mess, talk to me and thanks!!
>
> Mark Craig
> Diesel Performance Parts, INC.
> 411 Allied Drive
> Nashville, TN 37211
> 866-455-7788 Phone
> 615-834-9923 Fax
>
> www.dieselperformanceparts.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/openwheeldriver@frontiernet.
> net