[Fot] TR3 clutch

[Joe Alexander]

I have a drill jig that has been used by me and others to convert the Tr3
flywheel to a diaphragm style.  The flywheel should be lightened, while at
it.

It would seem that a stock set up for diaphragm should be adequate for a
few auto crosses a year.  We cross drill the fork and shaft. The pin is
just not a good design.

On Monday, October 20, 2014, David Kettler <dkettler1 at charter.net> wrote:

> I have a friend who does Auto X in his TR3.  He is looking for a clutch
> assembly that is less prone to slipping than the stock setup.  He has also
> broken the hardened pins holding the clutch fork to the shaft.
>
> Any recommendations?
>
> Thanks
>
> Dave Kettler
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/fot/joe at the-vintage-racer.com