[Fot] Steel camshafts

[Rick Parent]

I have found a guy to do it for less than $600 but I just can't pull the 
trigger. $600 plus $200 for the grind = $800, for a Spit cam??? The 
alternative to that is what I have been doing for 10 years. I use the 
chilled iron blanks, they come with the 1500 journal size (1.96), I line 
bore the block to except  bearings and Bingo a new cam, full lobes and no 
trouble. The cam blanks can
 support .480 of lift on the cam, we are not quite there yet ;-). I am out 
of cam blanks does anyone want to make a group order?

Rick


----- Original Message ----- 
From: "Kas Kastner" <kaskastner at gmail.com>
To: "FOT" <fot at autox.team.net>
Sent: Monday, May 05, 2014 11:48 AM
Subject: [Fot] Steel camshafts


> There has been a rash of broken camhsfts due to under cutting the forward
> section of the cam to produce a big lift & duration camshaft. There is a
> good chance that a complete STEEL billet with the lobes unground can be
> produced for about $695 each for a group buy of 5. It is pretty expensive,
> but then it will be the last one you'll ever have to buy.  Let me know. I
> have no monetary interest in this buy.
>
> *Never be beaten by equipment.*
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/rick.parent@att.net