[Fot] Al-Fin Drums

[John Styduhar]

II think the loving that Todd was talking about is to enlarge the Z-car
drum's center hole slightly to slip over the axle hub and to machine the
outside lip of the stock TR brake backing plate to fit into the recess
between the drum's steel lining and the aluminum casting around the
perimeter of the drum.  That worked for me.


On Tue, Mar 4, 2014 at 7:22 PM, Robert M. Lang <lang at isis.mit.edu> wrote:

> Hi,
>
> I was putting together a list of "Stuff" for a possible new Triumph racer
> and I noticed none of the usual places (US suppliers) have al-fin drums
> listed now...
>
> Anyone care to comment on availability?
>
> We're talking 9" drums for TR6 and probably TR4.
>
> I saw them on the Brit sites, but not on the US web sites.
>
> Regards,
> rml
> ------------------------------------------------------------
> ---------------
> Bob Lang              Triumph TR6!!            |  This space for rent
> Former NER Solo Chair                          |
> Voice:617-253-7438                             |  Cell: 339-927-4489
> ------------------------------------------------------------
> ---------------
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/fot/johnstydo at gmail.com